NECKLACE 4061 MICROPHONE
Sometimes convenient mounting and consistent output are the primary requirements. In these cases, the d:screet™ Necklace 4061 Microphone is the right solution. The mic features the legendary d:screet™ 4061 Miniature Omnidirectional Capsule in a soft rubber necklace.
This d:screet™ Necklace 4061 Microphone is the best choice for fast, repeatable and "do-it-yourself" mounting. The mic is designed for use by non-technicians. It is, for example, the perfect choice for a reality show setting.
With low noise and high sensitivity, the d:screet™ Necklace 4061 Microphone offers the most clear, transparent, and natural sound available on the miniature mic market. This condenser mic is capable of handling up to 154 dB peak before clipping. It has a linear response, low distortion and a large dynamic range. This necklace mic sounds great no matter the application.
The mic comes in three colors: black, white and brown. It is available in two lengths: 47 cm (18.3 in) or 53 cm (20.9 in).
Flexible adapter system
The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.
and d:vote™ series of miniature microphones
work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones’ ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.
Find the adapter that fits your wireless system.
The product offers the following features
Plug and play mounting
Minimal visual impact
Modular adapter system fits most professional wireless systems
WHAT'S IN THE BOX
NECKLACE 4061 MICROPHONE
MINIATURE GRID, HIGH BOOST, 5 PCS.
Typical on and off-axis response of a d:screet™ Necklace 4061
d:screet™ NECKLACE 4061 MICROPHONE
Principle of operation
20 Hz - 20 kHz
Frequency range, ±2 dB
High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz
6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4
Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Typ. 68 dB(A)
Total harmonic distortion (THD)
< 1% up to 123 dB SPL peak
Typ. 97 dB
Max. SPL, peak before clipping
From MicroDot: 30 - 40 Ω. From DAD6001: 100 Ω
Cable drive capability
Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Output balance principle
Signal balanced with DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR)
> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power supply (for full performance)
Min. 5 V to max. 50 V through DPA adapter for wireless systems
Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Black, brown or white
17 g (0.04 oz) incl. Cable and MicroDot connector
5.4 mm (0.21 in)
47 cm (18.5 in) / 53 cm (20.7 in)
1.2 m (3.9 ft)
Black, beige or brown
1.6 mm (0.06 in)
Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)
Up to 90%