Specifications for SC4098-BX30 Miniature
|
Directional characteristics: |
Supercardioid |
Principle of operation: |
Pressure gradient |
Cartridge type: |
Pre-polarized condenser |
Frequency range: |
20 Hz - 20 kHz |
Frequency range, ± 2 dB, 20 cm (7.9 in) distance: |
100 Hz – 15 kHz with 3 dB diffuse field boost at 8-15 kHz. Permanent 2nd order low-cut filter (-3 dB at 80 Hz) |
Sensitivity, nominal, ± 3 dB at 1 kHz: |
Sensitivity, nominal, ± 3 dB at 1 kHz: |
Equivalent noise level, A-weighted: |
Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A)) |
Equivalent noise level, ITU-R BS.468-4: |
Equivalent noise level, ITU-R BS.468-4: |
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): |
71 dB(A) |
Total Harmonic Distortion (THD): |
<1 % up to 125 dB SPL peak |
"-": |
<1 % up to 122 dB SPL RMS sine |
Dynamic range: |
Typ. 102 dB |
Max. SPL, peak before clipping: |
136 dB |
Output impedance: |
100 Ω |
Minimum load impedance: |
2 kΩ |
Cable drive capability: |
Up to 300 m (984 ft) |
Output balance principle: |
Impedance balancing with Active Drive |
Common Mode Rejection Ratio (CMRR): |
> 50 dB |
Power supply (for full performance): |
48 V phantom power ± 4 V |
Current consumption: |
3.5 mA |
Connector: |
XLR-M |
Polarity: |
+V at pin 2 for positive sound pressure |
Temperature range: |
-40 °C to 45 °C (-40 °F to 113 °F) |